Pepperl+Fuchs I HH20 Serie Kurzanleitung Seite 36

HANDHELD I*-HH20*
Operation
Setting the number of blocks
The number of blocks determines how many data blocks the Handheld reads
from the data carrier and how many data blocks can be written to the data
carrier. Each block corresponds to 4 bytes.
1.
2.
3.
4.
EN
5.
Reading data on data carriers
Read data on a data carrier as follows:
1.
2.
3.
36
Select Read/Write > Data read > No. blocks.
Refer to the table to calculate how many blocks you require to enter the
relevant data.
Press the CLEAR input key (
entered.
Enter the number of blocks using the input keys.
Press the left softkey (
Select Read/Write > Data read.
Position the read/write head on the Handheld directly beside the data
carrier.
Press the left softkey (
) to delete the quantity already
) to conform your entry.
).