Pepperl+Fuchs I HH20 Serie Kurzanleitung Seite 35

HANDHELD I*-HH20*
Operation
3.3 Read Data
Before the handheld can read the data stored on a tag, you must first tell it
what type of tag it is.
Setting the tag type
1. Select Settings > Tag type.
2. Press the Enter navigation key (
3. Press the left softkey (
An asterisk appears in front of the activated menu entry.
4. Press the right softkey (
The data that is read in is saved in the handheld or sent to the PC according to
the Settings > Send/Save setting.
If you want to add a time stamp to the data, go to the Settings > Time Stamp
menu and check the ON option.
) to activate the desired tag type.
) to confirm your selection.
) to exit the menu.
EN
35