Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HANDHELD I*-HH20*
Assembly
Caution!
Data loss
An incorrectly preset interface may lead to data loss.
Make sure that the Handheld is connected to the interface (USB, RS 232,
Bluetooth) preset in the Handheld. If necessary, use another interface cable or
modify the settings in the Handheld.
Connecting the interface cable to the Handheld
To connect the interface cable to the Handheld, proceed as follows:
1.
Turn the 8-pin DIN plug so that the arrows on the plug are pointing down-
wards.
2.
Hold the Handheld in your hand with the controls facing upwards.
3.
Insert the plug into the corresponding cable connection socket on the
Handheld.
4.
Press the plug firmly into the cable connection socket until the locking
device audibly engages.
The interface cable is now connected to the Handheld.
EN
31
Werbung
