Kärcher 2.641-811.0 Bedienungsanleitung Seite 8

Overview of dosing nozzles
The following table shows the colour en-
coding of the different dosing nozzles and
their mixing ratio in %.
Dosing Table
Colour encoding Mixing ratio*
Pink 0,20 %
Purple 0,50 %
Turquoise 0,65 %
Yellow 1,20 %
Brown 1,50 %
orange 1,90 %
Green 2,60 %
Light brown 3,20 %
Blue 4,80 %
White 5,80 %
Red 7,90 %
Beige 10,50 %
Black 12,50 %
Grey 13,50 %
*The values listed in the table are average
values, which were generated under the fol-
lowing conditions.
– Water pressure 3 bar.
– Fill hose 4 m.
Troubleshooting
Detergent is not getting sucked in
Check water pressure. The water pres-
sure must be between 2 bar and 6 bar.
Check the detergent suction hose for
obstructions, kinks and clamping, clean
or replace if necessary.
Check the dosing nozzle for obstruc-
tions, clean or replace if necessary.
Check the foot filter for obstructions,
clean or replace if necessary.
Check the sieve in the seal ring of the
ball tap for obstructions, clean or re-
place if necessary.
Warranty
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
8
English