Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. Vocal communication
To use the wireless headphones for vocal communication, pairing must
be performed with the desired Bluetooth device using the "hands-free
profile" (HFP) or "headset profile" (HSP).
For details on how to perform pairing, see P.11.
* If the Bluetooth device supports both profiles HFP and HSP, use the
profile HFP.
(1) With power to the wireless headphones' turned off, hold the (#) button
depressed for about three seconds.
The headphones' power will turn on and the LED indicator will flashing blue.
(2) Turn on the Bluetooth function on the device you wish to connect to.
When pairing is completed, the wireless headphones will automatically
connect to the Bluetooth device.
* If automatic connection is not achieved, or the headphones automatically
connect to a different Bluetooth device than the one you wish to use,
follow the instructions for the desired Bluetooth device regarding manual
connection.
* The unit's power will turn off automatically if it remains unconnected to
the Bluetooth device for five minutes.
Vocal communication controls
If the connected Bluetooth device supports AVRCP, the following operations
can be used.
• ( ) button
• ( ) button
• ( # ) button
The same controls are supported in the event a call is received while listen-
ing to music.
* When sound volume is set to maximum or minimum levels a beep sound
will be produced from the headphones.
* Sound volume can be adjusted on the matching Bluetooth device.
* Depending on the specifications of the connected Bluetooth device, the
14
controls noted above and controls on the Bluetooth device may not be
En
supported.
Press and hold : Increase volume.
Press and hold : Decrease volume.
Press once during transmission : transmission will stop
Press once when receiving a message : Enables conversation.
Press once again to end conversation.
Press and hold when receiving a message : Refuse
communication.
Press and hold : Conversations using this unit's microphone
will change to the cell phone or smart phone.
Hold the button for a long press again, to switch the
conversation from the cell phone/smart phone to the
microphone on this unit.
Press twice : Performs redialing.
Werbung
