Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• For details regarding operating and setting methods, consult the user's
manual for the Bluetooth device.
• Once pairing has been accomplished, connections will be performed
automatically, but if connection to the device was not successful,
perform the pairing operation again.
• These wireless headphones can record pairing information for up to 4
Bluetooth devices. If you wish to reconnect to that device on a subse-
quent occasions, it will be necessary to repeat pairing with that device.
• Whenever using a device with which pairing has been performed, first
turn on the power to the wireless headphones, then perform the con-
nection operation for the paired Bluetooth device.
8. Using NFC for pairing
When a smart phone or tablet device is equipped with NFC, Bluetooth
pairing (and depairing) can be performed simply by merely swiping the
device over the headphones.
• Supported OS: Android 4.1 and later.
• Depending on the smart phone or tablet device used, the NFC signal
reception may be too weak to perform one-touch connections. In that
case, follow the manual pairing procedure outlined in step 7.
How to set pairing
(1) Turn the power on for the other Bluetooth device, and turn on the NFC
function.
(2) With the headphone power OFF, hold the (#) button depressed for 8
seconds or more to enter the pairing mode.
(3) Pass the "N" mark on the device to be connected within 1 cm of the "N"
mark on the unit's R side. (see Fig. 9).
(4) The device will automatically begin setting the pairing.
Pairing is completed when the LED indicator flashes blue twice about
every four seconds.
* Only one device can be connected at a time.
Disconnecting
With the device connected to the unit, pass the other device's "N" mark
within 1 cm of the "N" mark on the unit's R side.
The connection will be automatically undone.
12
En
Werbung
