Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.4. Vibration Sensor
A button cell battery (3 V type CR2032) is included in
the delivery.
Insert a flat object into the recess on the battery
compartment cover and lift off the cover.
If the battery is flat, replace it with a new battery of
the same type.
Remove the flat battery and insert the new battery
in accordance with the polarity shown in the battery
compartment (see diagram).
Place the battery compartment cover back onto the sensor until it audibly clicks
into place.
8. Installing the Smart Home set
Ensure that the Smart Home components are located within the recep-
tion range of the Smart Home central unit. If the reception is not suffi-
cient for the relevant component, change the position of the Smart
Home central unit or, if required, add a second central unit to increase
the range of the Smart Home network.
8.1. Setting up the central unit
Select an installation location for the central unit that is within range of the oth-
er Smart Home components.
Screw the supplied Bluetooth antenna into the socket on the central unit in or-
der to guarantee optimal reception.
Connect the USB cable with the USB 2.0 Micro-B port and the other end to the
mains adapter.
Plug the mains adapter into a suitable socket.
The LED for the PAIR button lights up.
8.2. Door/window contact
The door/window contact can be fitted to doors, win-
dows and other objects that open and close.
Clean the mounting area.
It must be dry, clean and free of grease.
Mount the magnet and the transmitter to the frame
and leaf of the door or window using the supplied
adhesive strips, as illustrated above.
Mount the magnet flush to the transmitter with a
maximum distance of approx. 20 mm.
DE
EN
TR
41
Werbung
