Inserting The Battery; Setting The Calendar - Hama 00186379 Bedienungsanleitung

4. Getting Started

Inserting the battery

• Open the battery compartment (9), insert the battery/batteries, ensuring that
the batteries are inserted correctly in terms of polarity, and then close the battery
compartment (9). The thermometer is now ready for use.
Replacing the batteries
• If the display (1) becomes dimmer, you must replace the battery.
• When inserting the batteries, ensure that the polarity is correct.
5. Operation
• Press the MODE button (3) to switch between the three display modes available. The
modes are as follows (in that order): clock, calendar, alarm.
Note
• The product is usually in clock mode. If the product is in another mode, press the
MODE button (3) until it is in the mode you want.
• When you adjust the settings, the selected item will ash to indicate that it can be set.
5.1 Setting the time format/time
• In clock mode, press and hold the MODE button (3) for about 4 seconds to start setting
the time:
• Hours
• Minutes
• Press the UP (6) or DOWN (7) buttons to select the individual values.
• Press the MODE button (3) to adopt the set value displayed and skip to the next item.
• Press the MODE button (3) to save the settings and return to the normal display.

5.2 Setting the calendar

• In calendar mode, press and hold the MODE button (3) for about 4 seconds to start
setting the calendar:
• Year
• Month
• Day
• Press the UP (6) or DOWN (7) buttons to select the individual values.
• Press the MODE button (3) to adopt the set value displayed and skip to the next item.
• Press the MODE button (3) to save the settings and return to the normal display.
Note
• The weekday is set automatically when setting the date manually.
• If you do not make an entry for several minutes, you automatically exit the setup
mode. The settings that were made up to that point are not saved!
5.3 Switching between the 12/24-hour display formats
Press and hold the UP button (6) for about four seconds to switch between 12-hour and
24-hour time formats, AM or PM appears before the time.
5.4 Setting the alarm
• Repeatedly press the MODE button (3) to enter alarm mode.
• Press and hold the MODE button (3) for about four seconds to start setting the alarm.
• Hours
• Minutes
• Press the UP (6) or DOWN (7) buttons to select the individual values.
• Press the MODE button (3) to adopt the set value displayed and skip to the next item.
• Press the MODE button (3) to save the settings and return to the normal display.
5.5 Temperature measurements, maximum/minimum display
• Press the DOWN button (7) when in any mode to choose between °C (Celsius) and °F
(Fahrenheit).
• Press the MAX/MIN button (4) to display the maximum or minimum recorded values for
temperature and humidity.