Philips Baseline pro Bedienungsanleitung Seite 5

To adjust the loudspeaker
volume
Move the slider you will find on the right
side of the phone, under the symbol
To adjust the ring volume
Use the 3-position selector switch on the
right side of the phone, under the symbols
The symbols mean Off, Low and High
To adjust the ring tone
Use the 3-position selector switch on the
right side of the phone, under the symbols
The symbols mean Low, Medium and
High
To adjust the earpiece volume
Use the 2-position switch at the back of
the phone under the symbols
The symbols mean Normal and High
To check for messages
Check the indicator by the symbol
If it is lit, a message is waiting for you
To set the clock
Under the panel containing the memory
numbers, there are three buttons. The
one on the left represents the hours, the
one in the middle represents the minutes
and the one on the right is the Set button.
Lift the handset or press
Press the Set Clock button.
Press (and hold) the Hours button to set
the hours.
The clock uses the 24 hour format.
Optional: Press (and hold) the Minutes
button to set the minutes.
Replace the handset or press the Set
Clock button. The clock is now set.
Installation settings
During installation of the phone there are
three switches that need to be set
according to how the local iS3000 is
configured. The switches control:
•
Message waiting (Message)
This can be set to ON or OFF
•
Recall type (Recall)
This can be set to Earth Recall (ETH)
or Time Break Recall (TBR)
•
Recall timing (TBR)
The timing for TBR can be set to100,
300 or 600 ms
The three switches are located under the
panel containing the memory numbers.
If you have any questions regarding these
switch settings, contact the telephone
manager or your nearest service
representative.
BaseLine Pro
5