To Disable The Microphone In The Handset (Mute) Or Handsfree - Philips Baseline pro Bedienungsanleitung

BaseLine Pro
Storing and using numbers
that are longer than 16 digits
Explanation:
The maximum length of a number that
can be stored in memory is 16 digits. In
some cases however, the length of a
number together with its access code,
dialling code and pause digits may
exceed this length.
A number longer than 16 digits can be
stored in the memory by using two (or
more) locations to hold the complete
number.
Note: Numbers used for re-dial and the
temporary save can be up to 32 digits.
When calling the number you need to dial
the separate parts in sequence.
To temporarily save the
number you have just called
Lift the handset, or press
Dial the number
Press
The number is placed in a temporary
memory, where it will remain until a
different number is saved.
To use the number saved temporarily, just
lift the handset and press
To re-dial the last number
called
Lift the handset or press
Press
4
To disable the microphone in
the handset (Mute) or
handsfree
Press
Whatever you say now cannot be heard
by the other party. The LED indicator by
the symbol is lit when the mute function is
on.
The button has a toggle action,
pressing the button again restores the
microphone in the handset or handsfree.
Note: You can also disable the handset
microphone by pressing the pushbutton
on the handset itself.
The status of the
continues if you change the speaking
mode. When the line is released the Mute
function is turned off.
To check the duration of a
call
When you have finished dialling, press
Elapsed time will count up on the display.
If you forget to start the timer it will begin
automatically 6 seconds after the last digit
is dialled.
At the end of a call, press
The display shows the call duration for a
few seconds after the end of the call.
To check the duration of the last call:
Lift the handset or press
Press
The display shows the duration of the last
call.
button (on or off)
again.