Sleep Mode - EARTO KG637-V2 Bedienungsanleitung

B: Shake mode: control the computer not to sleep, the cursor slides
automatically, press and hold for 3 seconds to turn on/off.
Operation method:
Press and hold the DPI button for 3 seconds, the mouse will turn on the
mouse shake mode, the green light will flash every three seconds, you can
still work normally in the mouse shake mode.
When you want to exit the mode, press the DPI button again for 3 seconds
or unplug the USB receiver, the green light will turn off.
③ Left mouse Button: Click the selected target, double-click
to open the program.
④ Right Mouse Button: Click the pop-up menu.
⑤ Side Key 1: Web page forward.
⑥ Side Key 2: Backward the web page.

Sleep Mode

1. The keyboard will automatically enter sleep mode after 90 seconds of
inactivity, when using the keyboard again, press any key and wait 2-3
seconds, the keyboard will automatically connect to the device.
2. If you don't use it for 5 minutes, the mouse will enter sleep mode, when
you use the mouse again, press any key and wait for 2-3 seconds, the mouse
will automatically connect to the device.
12