INVENTO VELOCITY NANO RTF Gebrauchsanleitung Seite 16

Connection between transmitter and receiver
Push the throttle stick to the lowest position.
ON/OFF
switch
Turn the quadcopter on
Turn off
16
Step 1
Move the ON/OFF switch on the
quadcopter to ON. Now place the
quadcopter on a level surface.
Step 2
Move the ON/OFF switch on the remote
controller to ON (with throttle stick in
lowest position). Now move the throttle
stick quickly from the lowest position to
full throttle and back to the lowest po-
sition to start the connection between
transmitter and receiver.
ON/OFF
Step 3
Switch off quadcopter after flight to
avoid deep discharges and a destruction
oft he LiPo batteries.
Step 4
Switch of the controller after flight.
Remove the batteries for storage if the
controller is not to be used for a longer
period of time and prevent battery
leakage, controller damage or even fire.