VONYX STM-3020B Gebrauchsanleitung Seite 4

OPERATION
1.
CUE
Turn to select the channel you want to listen via headphones.
2.
INPUT SELECTOR CHANNEL 1,2,3.
Press to select of the input on the respective channel. The "PHONO" setting is intended for turntables and for all other
signal sources, i.e. a CD player, use the "LINE" setting.
3.
USB PORT
4.
TALKOVER
Press this button for automatic lower the level of the input sources when using the microphones.
5.
MICROPHONE LEVEL
Adjust the volume of the microphone signal.
6.
CHANNEL ADJUST
Adjust the final channel volume.
7.
CROSSFADER CH1 / CH2
Adjust the fade between channel 1 and 2.
8.
PHONES LEVEL
Adjust the volume of the headphones signal.
9.
VU METER
Indicate the output levels of left and right master channels
10.
NEXT / PLAY-PAUZE / NEXT / VOLUME - + / EQ PLAYER BUTTONS
4