Cloud Nine 2-IN-1 CONTOURING IRON PRO Gebrauchsanweisung Seite 6

INSTRUCTION FOR USE
READ ALL INSTRUCTIONS BEFORE USING
1. Plug into the mains and turn on by pressing the power
button down for two seconds.
2. Adjust heat between 100°C and 200°C by touching the
temperature arrow up or down until the LED is positioned
on the desired temperature. The LED blinks while heating
up or cooling down, and turns solid once temperature
stabilises.
When the temperature is set at the highest, the
indicator turns o . When the
lowest, the
3. To activate REVIVE MODE press the power button lightly.
The temperature is fixed at 150°C.
4. Before using the styling iron, ensure your hair is dry. Using a
styling iron on wet hair can damage the hair cuticle.
5. Separating hair into sections allows for easier styling. Pass
through the hair starting near the scalp, at a steady,
controlled pace. CLOUD NINE's advanced
usually requires just one pass to achieve styling results.
6. Use the convex (curved outward) heat plate, and gently
rotate as you pass through hair for maximum volumizing
e ect.
7. The iron goes into hibernation mode after 30 minutes of
inactivity, emits a warning beep and the LED indicator
blinks slowly. To re-use, close the iron once or press the
power button quickly.
8. After use, turn power o , unplug the cord and store in a safe
location. Do not wind the cord around the styling iron. Allow
plates to cool before storing.
LED indicator turns o .
temperature is set at the
LED
technology