Status Field; Disc Type Symbols; Operating Mode Symbols; Tuner Information Box - ShowView DVDR 730 00 Bedienungsanleitung

Information on the screen of your TV

Status field

The status field shows the current operating mode (status) of the DVD
recorder and the type of disc inserted. This display can be switched off.

Disc type symbols

M
DVD+RW
W
DVD+R
N DVD Video
O Video CD
P No disc
Q Error

Operating mode symbols

R Recording
S Stop
T Playback
U Playback Pause
V Record Pause
X Search forwards (8x speed)
Y Search backwards (8x speed)
Z Slow motion
26

Tuner information box

This field is located in the bottom left-hand corner of the screen. The
aerial signal, the TV channel and the TV channel name for the selected
programme are displayed.
a Current channel/selected input socket
b No signal
The TV channel is not available/the additional device is not
connected or it is switched off
c Copy protected signal

'Live picture' in the 'Tuner information box'

Instead of the information about the aerial signal or the TV channel,
you can watch the picture of the selected TV channel or the signal on
the input socket.
1 In the system menu (button SYSTEM MENU ) select the symbol
' and confirm with C
' w
2 In the line 'Live source view' select 'On' to view this picture or
'Offto switch this picture off.
3 End with OK and then SYSTEM MENU .

Timer information box

This box appears above the tuner information box. When a timer
recording is set, it shows the timer icon and the start time or date of
the first programme to be recorded.
If no timer recording is scheduled, the current time is displayed.
This box disappears during playback of a disc or after a recording
starts. However, you can access it during an OTR recording by
pressing SYSTEM MENU .
f Timer starts on the day/time shown
g OTR recording runs until the stop time displayed
h Current time
No timer event programmed