MAINTENANCE:
Proper maintenance is critical to the performance and safe operation of the running bike. Always inspect the bike and
conduct necessary maintenance before each use of the running bike. Failure to conduct maintenance on the bike may
result in malfunction of a critical part or serious injury or death.
This section presents important information on maintenance and will assist you in determining the proper course of action to
take if you have a problem with the operation of the bike.
The following procedures will help you maintain your running bike for years of enjoyable riding.
1) For painted frames, dust the surface and remove any loose dirt with a dry cloth. To clean, wipe with a damp cloth
soaked in a mild detergent mixture.
2) Clear any debris between the wheels and frame.
3) Store your running bike under shelter. Avoid leaving it in the rain or exposed to corrosive materials.
4) If paint has become scratched or chipped to the metal, use touch up paint to prevent rust. Clear nail polish can also be
used as a preventative measure.
5) Check that the wheels are securely fastened to the bike and axle nuts are tight.
WARRANTY LIMITATIONS!
Complaint returned to the distributor is to be accepted only with all original components.
Warranty does not cover: damages caused by accidents, misuse or improper repair of the product; worn parts; parts not
lubricated, scratched or damaged by corrosion as well as installation of non-original spare parts. Complaints concerning
worn wheels WILL NOT BE ACCEPTED (it refers to consumable parts). This product is not intended to acrobatic and
extreme performances (jumping over obstacles, jumping down etc.). Manufacturer is not responsible for damage caused
to health and property, which may result from such use.
Any complaint must be made i mmediately after discovery of the defect, in the shop where running bike had been
purchased. Consumer cannot continue to use the product, in which he had found a defect.
Only products cleaned and without any dirt can be claimed. Defected items should be delivered in the durable (best
original) packaging, with item code. While lodging complaint, the proof of purchase must be shown. Seller shall submit a
written complaint about the bike state, in which the exact reason of complaint is described. The right to make a complaint
expires after the warranty period has expired.
MANUFACTURER: ABISAL SP. Z O.O.
UL. ŚW. ELŻBIETY 6
41-905 BYTOM, POLAND
COUNTRY OF ORIGIN: CHINA
CZ- Distributor
ABISTORE SPORT S.R.O U Cihelny 230/3 74801 Hlučín, Česká Republika
www.abistore.cz
EU DECLARATION OF CONFORMITY
can be found on the manufacturer's website:
www.abisal.pl/do-pobrania/
Strona 7 z 16