Phone Book - FREEWIRE DECT DIGITAL FW102 Bedienungsanleitung

To delete a number from the CID list
When the number of the CID list is displayed, press
appear. Press
displayed.When the list is empty, "EMPTY" will be displayed.
To set the handset ring tone volume
Is possible to choose between 5 levels of volume for the handset ring tones.
When the handset is in stand-by mode:
Quickly press the
displayed and the handset will ring. Use
Press the button to confirm.
To set the handset ring tone melody
Is possible to choose between 9 melodies for the handset ring tones.
When the cordless is in stand-by mode:
Keep pressing the
displayed, then release the button. Use
the other melodies. Press the
To set the base ring tone melody
Is possible to choose between 9 melodies for the base ring tones.
Press the button, then press more times
displayed. Press the
will ring. Use
Press button to confirm the desired melody, press INT button to return in stand-
by mode.
To set the base ring tone volume
Is possible to choose between 5 volume level for the base ring tones.
Press the button, then press more times
displayed. Press the
will ring. Use
Press button to confirm the desired melody, press INT button to return in stand-by
mode.

PHONE BOOK

The phone book can stored until 50 telephone number (max. 25 digits) with the
respective name (max. 14 characters).
Save a number on Phonebook
Keep pressing
Enter te name, press C if you want to delete a character.
Press to confirm, "NUMBER?" is displayed, then enter the number and press
to confirm.
Note: if your cordless is connected to a PABX switchboard insert a pause by P button
between access code and telephone number.
button to confirm the deletion, the next number in CID list is
button, "VOLUME" with the current value of the volume is
button until "TUNE" is displayed, the current melody value is
button to confirm.
button, the current tune value is displayed and the base
buttons to change and listen the other melodies.
button, the current volume value is displayed and the base
buttons to adjust the base ring tone volume.
button for about 2 seconds, "NAME?" is displayed.
\
C
button; "DELETE?" will
buttons to change the volume level.
buttons to change the change and listen
button until "BS TUNE" is
button until "BS VOLUME" is
EN