AWOL VISION LTV-3500 Bedienungsanleitung Seite 32

No sound or picture
The picture is normal but there
is no sound
The sound and/or picture is distorted
or appears wavy
The remote control does not work
Android system not working
The system prompts a message of high
temperature and the device shuts off
automatically
1. Check if the power cord is plugged into a powered AC outlet.
2. Press the Power button on the remote control to activate the unit from 'Standby' mode.
3. Check to see if the LED light is on or not. If it is, then the TriChroma laser is receiving power.
1. Check the volume settings.
2. Check if 'Mute' mode is set to On.
3. Check the sound output setting status (Speaker, Bluetooth, HDMI (eARC) or S/PDIF).
1. An electric appliance may be affecting the projector. Turn off any appliances that
are nearby and move it farther away from the TriChroma laser.
2. Insert the power plug of the TriChroma laser set into another power outlet.
1. Confirm that TriChroma laser still has power and is operational.
2. Change the batteries in the remote control.
3. Check if the batteries are correctly installed.
Power off the device, unplug the power cord. Plug it again after 1 minute
and power on the device.
Make sure the device is working in a proper ambient temperature (within the device's
working temperature range) and that the vents are not blocked. Restart the device.