Westfalia 97 41 73 Originalanleitung Seite 7

Operation
The light is switched on by pressing and holding the push button in the middle
of the light field. Press the button again to switch the light to a higher luminosity,
another press will reach the highest luminosity. If you press the button again,
the light flashes with full brightness.
Quickly press the button 2 times to activate the air pump. The air is expelled
through the side nozzle. To use the air pump as a vacuum pump, loosen the
bayonet lock on the upper part and remove it. Use the internal parts to connect
the pump to the part to be emptied.
Charging the Battery
Use the included charging cable to connect the device to a USB socket.
Cleaning
 Clean the device with a slightly damp cloth. If necessary, use some washing-
up liquid as well. Do not immerse the device in liquids.
 Do not use harsh chemicals or abrasives to avoid damaging the surfaces.
Technical Data
Weight:
Dimensions:
Filling pressure:
Airflow:
Compression Degree:
Charging Current:
LED:
Battery:
Burn time:
Operating / cooling time:
OPERATION
120 g
Ø 47 x 87 mm
0,33 bar
170 l/min
65 %
5 V USB Max 1 A
8x 45/230/410 lm, 4000 K (warm white)
2x Li-Ion 3.7 V, 680 mAh, 2,516 Wh
11/5/3 hours
15 min / 15 min
7