IKEA VARMFRONT E2037 Bedienungsanleitung Seite 7

Power button function (E2037)
Check power status
• Click once on the POWER button and the LED indicators will light up
and indicate the remaining power status.
• If the USB cable is not disconnected while the charging process
finishes, push the POWER button first to restart the charging.
Small current supply mode
• Press the POWER button for 8 seconds when your device is being
charged.
• The function is mainly used to charge certain wearable electronic
devices. When charging a device that needs a charging current
less than 100mA via a USB-A port, this mode should be activated.
You can press the button for 3 seconds to exit this mode, it also
automatically closes after 2 hours.
7