Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FlinQ Bath Bucket
ENG
Instructions
Read through this entire instruction manual before using the new version FLINQ Bath
Bucket. We're dedicated to bring you well-designed products that make bathing fun and
easy.
Specifi cations
Brand:
Model:
Size:
Weight:
Capacity of water:
Materials:
Battery:
Accessories
1x water drain pipe
1x water plug and water pipe joint
1x hanging basket
1x anti-skid cushion
1x small bailer
4
Premium
FlinQ
Bath Bucket Premium
932 mm x 522 mm x 640 mm
About 5 kg per set
165 L
PP plastic
2 x LR44 / 2 x AG13
Installation steps
1. Put the water plug on
2. Connect the drain pipe
inside and water pipe joint
on outside joint.
on outside.
4. Place the hanging basket
5. Pull out the battery insulation sheet of the electronic
on the side of Bath Bucket
thermometer, then the temperature will be displayed.
Attention
1. When putting in warm water, the recommended temperature is between 37 and 38
degrees Celsius to avoid scalding. Keep water about 1/2 or 2/3 height of bath bucket
to avoid spillage after getting in.
2. When you are done bathing, open the drain plug and the water will fl ow out. If there
is some water left in the bucket, please do not pour it from the end which has the
electronic thermometer.
3. The button batteries can last for about a year. When the batteries run out, they can
be replaced. The battery model is LR44 or AG13.
3. Place the anti-skid
cushion in the bath
5
Werbung
