Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connectors (elysia qube)
Audio inputs
(XLR and ¼" phone jack)
Audio outputs
(XLR and ¼" phone jack)
Power switch
Please note that in stereo operation
both channels are always processed by
one single control voltage generated
from a mix of both signals. This means
you should only compress adequate
stereo material like sum signals in this
mode - dissimilar signals like a bass
drum in one channel and a synth pad in
the other will not give you the intended
'dual mono'results.
Mono operation: Connect either input and output 1 or 2 - both will work
identically.
Stereo operation: Connect both inputs and outputs 1 and 2 - the choice
which channel is left and which is right is up to you.
Inputs (+4 dBu)
XLR balanced:
XLR unbalanced:
Jack balanced:
Jack unbalanced:
Outputs (+4 dBu)
XLR balanced:
XLR unbalanced:
Jack balanced:
Jack unbalanced:
6
IN 2
IN 2
OUT 2
OUT 2
Power
elysia GmbH | Am Panneschopp 18 | 41334 Nettetal | Germany
Pin 1: ground
Pin 1: ground
Sleeve: ground Tip: hot (+)
Sleeve: ground Tip: hot (+)
Pin 1: ground
Pin 1: ground
Sleeve: ground Tip: hot (+)
Sleeve: ground Tip: hot (+)
Attention!
There may be 48V!
+ 16 Volt
- 16 Volt
Pin 2: hot (+) Pin 3: cold (-)
Pin 2: hot (+) Pin 3: ground
Ring: cold (-)
Ring: ground
Pin 2: hot (+) Pin 3: ground
Pin 2: hot (+) Pin 3: idle
Ring: ground
Ring: idle
IN 1
IN 1
OUT 1
OUT 1
18V/1A DC
Werbung
Inhaltsverzeichnis
