SUPRENT HC596 Bedienungsanleitung Seite 4

En
PARAMETERS
Operating voltage: 3V
Motor
Battery type: 1400mAh
Charge time: 2h
Battery
Professional
Hair Clipper
Operating time: 3h
USB connect with adapter5V== 100mA
Charge
Power: 5W
USE THE RECHARGEABLE MODE
1.Insert the charger into the tail of clipper, connect tothe power to start charging.
2.The liquid crystal indicator lights up, indicating that it startscharging.
Note: when the power is switched on after charging, the indicator lights up to
indicate that the charging head is reversed or drawn to be replaced immediately.
2
FIXED-LENGTH FUNCTION
A: Features[ 2/3/4mm ] 3 lengths adjustment to controlhair length.
1.To determine the length of haircut
2.To select the appropriate limit comb
2
Mount the limit comb:
1
2 1.Align the limit comb with the blade edge
2.Slightly forward push to mount it.
Disassemble the limit comb:
Just pull hard the limit comb
BLADE REMOVAL & INSTALLATION
Blade Removal
Such as a screwdriver with the
rotary cutter head under part,
remove the cutter head
En
To prevent the knife from flling,
use another hand to hold it
3