iOttie Auto Sense Handbuch Seite 5

Installation
CD Slot Mount
1. Attach the CD mount to
the cradle. Tighten using the
adjustment knob.
3. Test to make sure the mount
is secure. Insert bracket only
if needed.
* If using the bracket, make sure
the arrow is pointing inward.
To avoid possible damage to the product and your vehicle,
remember to remove all CDs from the CD slot before using your
Auto Sense Mount. iOttie is not liable for damage due to misuse.
8 EN
2. Put the mount into the CD slot
and pull the lever to lock it
into place.
4. Align your smartphone in
the center of the cradle. The
indicator light will turn on when
the phone is successfully
charging.
Air Vent Mount
1. Attach the air vent mount to
the cradle. Tighten using the
adjustment knob.
3. Slowly tighten the twist lock to
ensure a secure connection to
the air vent blade.
Please use caution when adjusting the twist lock on the air vent blade.
2. Loosen the twist lock and push
the mount completely onto the
air vent blade.
4. Align the smartphone in the
center of the cradle. The
indicator light will turn on when
the phone is successfully
charging.
9