Disassembling The Product - Sunmer PADDLING POOL Benutzeranleitung

Assembling the Product
1. Find an area of flat ground and ensure there are no stones,
gravel, glass, etc. Never install the pool on a hard surface such as
concrete or asphalt and never install the pool close to trees and
any source of electric power.
2. Locate the pool as close as possible to a drain area as it will be
impossible to move the pool once filled with water.
3. Take out the product from package and check if any parts are
missing. Unfold it on the ground, lay it flat then locate and open
the inflation valves.
4. It is recommended that you use a hand or foot pump to inflate.
5. Slowly inflate all compartments, close, and press all valves tightly
after inflation.
6. Fill with water.

Disassembling the Product

Empty the pool by opening the water drain, once the water is
drained from the pool, deflate the pool wall, let the pool dry and fold
it up carefully.