STELLANTIS Lancia Ypsilon 7-inch CarPlay/Android Auto Multimediasystem Kurzbedienungsanleitung Seite 16

set the display brightness according to "Day",
"Night" condition.
AUTOPLAY: If option is set to ON when insert
USB the music starts automatically, if it is set to
OFF it is necessary to press on MEDIA button to
start play music from USB.
POWER OFF DELAY: If option is set 20 min,
radio will be stayed ON for 20 minutes after key
is set to Off. If option is set to 00 min, radio will be
turned off immediately after key off.
ANDROID AUTO: Press ON button to allow
connection to Android Auto and press OFF not to
allow connection to Android Auto.
REAR VİEW CAMERA: Shift into reverse gear
(R) and radio display will automatically show the
rear of your car.
BLUETOOTH PHONE
®
Bluetooth Streaming Audio (BTSA) mode is
®
entered by pairing a Bluetooth device, containing
®
music, to the Multimedia System. Before
proceeding, the Bluetooth device must be paired
®
to the Multimedia System.
NOTE: See the pairing procedure in the Phone
Mode section for more details.
To access Bluetooth mode, press the "Source"
®
button under the Media Menu of the Home Page,
and then select "Bluetooth Audio" BT Phone
®
mainscreen.
If the pairing process is interrupted or fails, it is
recommended to delete the names of the two
corresponding devices from the list of paired
phones / devices from the phone and radio and
repeat the procedure again from the starting
point."
Android Auto / Apple CarPlay
The Apple CarPlay and Android Auto applications
allow you to use your smartphone in the car safely
and intuitively. To enable wireless session, just
connect a compatible smartphone via Bluetooth
16 / 52
communication and the phone's contents will be
automatically shown on the system display. To
enable wired session, connect your phone via
USB cable through USB port and the phone's
contents will be automatically shown on the
system display. To check the compatibility of your
smartphone, see the indications on the websites:
https:/https://www.android.com/auto/ for Android
Auto, https://www.apple.com/tr/ios/carplay/ for
CarPlay
Radio is compliant to EU norm "2022/179 of
February 2022" which harmonizes the conditions
for the availability and efficient use of the
frequency bands for wireless access systems
including radio local area networks (vehicles
included).
Member States shall monitor the evolution of
standards and technology in relation to the use of
the frequency bands.
In this transition phase sporadic disconnections
could occur in case of noises due to external
disturbance.
Your WiFi connection will be automatically
restored by the radio as soon as the disturbance
disappears.
Android Auto AutoPlay
On your mobile device you have three options to
select from:
Always -> When Android Auto connection is
established, AA page is shown automatically.
If used on the last drive -> When turned off last
time, if AA page is shown, when turned on next
time, AA will automatically open up.
Default (Set by the car) -> if the settings is on,
it'll be shown automatically, if it's off, it will not be
shown.
USB AUTOPLAY SETTINGS:
AutoPlay is a feature of the multimedia system
that automatically begins playing music of the
USB device, as soon as it is connected. This
feature can be turned on or off in this menu. Its
default setting is on.
RVC
Shift into reverse gear (R) and your display will
automatically show the rear of your car.
Note-1: It is not possible to start a new paring
during driving.
Note-2: If the phone is not connected
automatically, press PHONE button and
connection will start automatically.
Note-3: To download all phone contacts into the
radio phonebook, be sure your device has no
restriction activated.
Full User Manual:
Please visit www.stellantisinfotainment.com for
long user manuals.
Scanning the QR code with a mobile device
allows accessing the web site
www.stellantisinfotainment.com
Lancia Ypsilon Multimedia Short User Manual