Installation & Operation - Pro User Cb45 Bedienungsanleitung

Please allow the product to stand upright for 10 hours before using it. Please allow the product to stand upright for 10 hours before using it.
Please allow the product to stand upright for 10 hours before using it. Please allow the product to stand upright for 10 hours before using it.
1) Make sure the device is stable on the surface.
2) Insert 1 of the supplied cables (12V/24V or adapter 230V AC) into the power connection
point in the cooler.
3) Insert the other side of the supplied cables into the 12V/24V supply or into the 230V AC
socket (adapter).
The cooler is now ready for use and can be switched on. To make the cooler perform to your
satisfaction, please follow these steps:
Turning on and o Turning on and o
Turning on and o Turning on and o
Press for 5 seconds to switch on/o the cooler.
Note: After shutting down and restarting, the compressor has a delay protection (3 minutes).
Temperature settings Temperature settings
Temperature settings Temperature settings
Shortly press in turn, and set the temperature values for large and small boxes will flash
correspondingly. Then press the
press any key, the set temperature value will be saved after flashing for 5 seconds.
General settings General settings
General settings General settings
Shortly press
flash in turn repeatedly to access the setting state of temperature unit and compressor
speed. After the flashing of the corresponding parameter stops, the cooler will save the set
value of the parameter.
Explanation of parameters:
°F: Fahrenheit temperature display
°C: Celsius temperature display
L / M / H: Battery voltage protection level
The battery protection function prevents the vehicle or marine battery from draining:
Battery voltage
protection
H
M
L
INSTALLATION & OPERATION
+ -
or keys to adjust the set temperature value. If you don't
and °F will flash. Press
12V Stop
11.7 + 0.3V 12.7 + 0.3V
10.7 + 0.3V 11.7 + 0.3V
10.2 + 0.3V 11.2 + 0.3V
repeatedly and °F, °C, MAX, ECO, H, M and L will
MAX: System powerful mode
ECO: System energy-saving mode
12V Start 24V Stop
24.6 + 0.3V
22.6 + 0.3V
21.6 + 0.3V
6
24 Start
26.0 + 0.3V
24.0 + 0.3V
23.0 + 0.3V