Hummer Multifunctional Power Bank Benutzerhandbuch Seite 6

JUMP STARTING STEPS:
1. Ensure that the battery level of the jump starter is
sufficient for jump starting (i.e. over THREE lights).
2. Plug the Sparkless Smart Cable into the jump
starter.
3. Connect Red clamp to the positive (+) battery terminal first, then connect Black
clamp to the negative (-) battery terminal.
4. Before jump starting, check the jump start indicator beside the BOOST button.
a. If the green indicator light is on, means ready to jump start.
b. If the red indicator light is on, means a misconnection between the clamp and battery
terminal.
c. If the red indicator light is blinking, means Reverse Charge protection is activated or
Low Battery.
All manuals and user guides at all-guides.com
R: red clamp
B: black clamp
Green
Red