How To Set The Time - PEGOUD CELESTIN AUTOMATIC Bedienungsanleitung

BEFORE YOU USE THIS WATCH, IT
IS RECOMMENDED THAT YOU
MANUALLY WIND THE MAINSPRING
TO START IT MOVING.
THIS WATCH IS AN AUTOMATIC
WATCH EQUIPPED WITH A MANUAL
WINDING MECHANISM.
WINDING THE MAINSPRING
When the crown is in
position [0], turn the crown
clockwise to wind. Wind
0
5-10 times and it will start
to move naturally after
shaking slightly.
* This watch MUST be worn for at least
8 (Eight) hours each day to ensure it
is fully wound. An automatic watch
will only wind when the watch is on
your wrist and your arm moves.
Winding the watch by the crown will
put power on the spring but not
enough to allow the watch to
function fully. If your watch stops
overnight or loses time it means it is
not being fully wound.

HOW TO SET THE TIME

1. Pull the crown out to position
[2]-(2nd click).
2. Turn the crown clockwise to set the
correct time.
3. Push the crown back in the position
[0].
0
1
0
* Take a.m./p.m. into consideration
when setting the hour and minute
hands to the desired time.
2
2
3