Using The Device - Magnani MI-HA-BLS01-B Serie Bedienungsanleitung

Parts & features of the device
Measuring cup
1
Blender lid
2
3 Blender jar
Carrying handle
4
Stirring blade base
5
Ring base (with sealing ring)
6
Recess of blender jar
7
Blender base
8
9 Control knob
Feet (suction cups)
10
First use
• Remove the device and accessories from the box. Remove any stickers, protective film or plastic from the
device.
• Before you use the device for the first time, clean the stirring blade base
cloth.
• Clean the measuring cup
and washing-up liquid. Do not clean the stirring blade base
liquid.
• Thoroughly dry the device and accessories.
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool; these damage the
device.
• Before connecting the device to the mains power, first mount the accessories to the blender base
make sure the control knob
• Connect the device to the mains power.
• NOTE! When using the device for the first time, a slight odour might occur, this is normal. The odour will
disappear after a few minutes. Ensure adequate ventilation.
Power ON/OFF
• Before the device is connected to the mains power, make sure that the accessories are securely mounted
to the blender base
blender lid is properly placed on the blender jar
2
clockwise to speed position "1" or speed position "2" or turn the control knob
position "P" and hold it.
• Switch off the device by setting the control knob
• When finished using the device, remove the power plug from the mains power.

Using the device

• Before each use, make sure the device is clean and dry.
• WARNING! Before installing or releasing the blender jar of the device, make sure the rotating
parts have reached standstill, and the power plug has been removed from the mains power!
• Before connecting the device to the mains power, make sure that the accessories are securely mounted to the
blender base and the control knob
8
• Place the stirring blade base
stirring blade base counter-clockwise to the bottom of the blender jar
base is placed correctly! When the sealing ring is not placed correctly, there is a risk of leakage.
6
• Mount the blender jar
the blender jar
3
the blender base. The blender jar is now secured to the blender base.
• The device will only operate when the blender jar is correctly placed and secured to the blender base.
• WARNING! The motor of the device will automatically switch off when the blender jar is released from the
EN 04
, blender lid
1
is in the "0" position
9
and the control knob
8
is in the "0" position.
9
in the ring base
5
onto the blender base
3
is aligned with the recess
and ring base (with sealing ring)
blender jar
2 3
or blender base
5
is in the "0" position. Add the ingredients and make sure the
9
. Switch on the device by turning the control knob
3
to the "0" position.
9
with the blade upwards. Then screw the ring base with the
6
; make sure the bulge (from the ring base) at the bottom of
8
of the blender base
7
1
2
3
4
5
6
and blender base
5
in water or any other
8
counter-clockwise to pulse
9
. Make sure the sealing ring of the ring
3
. Then gently push the blender jar
8
7
8
9
10
with a damp
8
in warm water
6
and
8
9
onto
3