Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Electronic Lighter
Item no: 2633085
1 Intended use
The product is a USB-C® rechargeable electronic arc lighter. It has a touch activated button and the arc
discharge is wind resistant.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
2 Delivery contents
■
Product
■
USB-C® to USB-A charging cable
■
Operating instructions
3 Latest product information
Download the latest product information at
low the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can
lead to personal injury.
Read the operating instructions carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Product
■
Do not allow product to make contact with flames or sparks.
■
Risk of short circuit! Do not allow the arc to come in contact with conductive materials.
■
Risk of burns and/or fire!
– Check the electric arc is fully extinguished after use.
– Arc tip can become extremely hot after use, allow to cool down before storing away.
– Always discharge the arc away from face, body, and clothing.
– Do not touch the electric arc.
Important:
Always close the cover when the product is not in use.
2
www.conrad.com/downloads
or scan the QR code shown. Fol-
This product is constructed according to
protection class III.
6 Product overview
3
2
1
1
USB-C® charging port
3
Power button
7 Charging the battery
1. Connect one end of the charging cable to the charging input on the product.
2. Connect the other end of the charging cable to a suitable power supply.
8 Operation
1. Open the cover.
2. Touch the power button to discharge the arc.
3. Close the cover to cancel the arc.
à
The system will automatically switch the power OFF after approx. 7 seconds of continuous use.
Important:
Always close the cover when the product is not in use.
9 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
– Do not touch the part where the arc forms.
1. Close the cover and allow the product to completely cool down.
2. Clean the product with a dry, fibre-free cloth
10 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU mar-
ket. This symbol indicates that this device should not be disposed of as unsorted municipal
waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separ-
ately from unsorted municipal waste. Spent batteries and accumulators, which are not en-
closed by the WEEE, as well as lamps that can be removed from the WEEE in a non-de-
structive manner, must be removed by end users from the WEEE in a non-destructive man-
ner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options free of charge (more details on our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points set up by man-
ufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
11 Technical data
Input ....................................................... 5 V/DC 1 A via USB-C®
Rechargeable battery ............................. 3.7 V 220 mAh Li-ion (built-in)
Battery recharge time ............................. 1 - 2 hrs
Ignition source ........................................ 2x electronic arcs
Battery life............................................... approx. 80 activations,1 - 2 seconds ignition
Operating conditions............................... -10 to 45 °C, ≤70 % RH (non-condensing)
Storage conditions.................................. -10 to 45 °C, ≤90 % RH (non-condensing)
Dimensions (L x W x H).......................... 73 x 36 x 12.5 mm
Weight .................................................... 77 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2633085_V2_0223_dh_mh_en 9007200028743691-2 I2/O2 en
4
2
Battery status indicators
4
Arc
Werbung
