PATONA Pocket4C Anleitung Seite 3

EN | PATONA Powerbank Pocket4C
» Capacity: 10000mAh
» Input: 5V/2.1A
» Output: 5V/2.1A
» Connections: USB-A, Micro-USB, USB-C, Lightning for iPhone
Charging the power bank:
» Connect the power bank to a USB power adapter with the USB cable (we
recommend the PATONA Dual-Port USB Charger 2584).
» The small LED lamp lights up when charging and goes out as soon as the
power bank is fully charged.
» By pressing the power button on the side, you can see the current charge
status on the display: 25% / 50% / 75% / 100%.
How to use your power bank:
» You can use the power bank to charge your mobile phone, tablet and other
mobile devices.
» You can charge smartphones and tablets with the four integrated charging
cables. Use the appropriate Micro-USB, USB-C or Lightning cable for
this. Many other mobile devices that use these connections can also be
charged with this power bank.
» The USB-A connection allows you to use the power bank as a power sup-
ply for many other mobile devices (digital camera, Bluetooth headset, etc.).
» All connections can be used at the same time, which means that you can
charge several end devices at the same time.
Safety instructions:
» Please charge the power bank approx. Every 4 months, even if it is not
used much or if it is not used, in order to preserve its service life.
» Do not expose the power bank to liquids and avoid extreme temperatures.
» The power bank may only be dismantled and repaired by experienced
specialists.
» Do not drop the power bank, protect it from strong impacts and vibrations.
PATONA International S.L.U.
Untere Giesswiesen 17, 78247 Hilzingen, Germany