Modifications - 130R KATSURA Bedienungsanleitung

TREAT YOUR HELMET WELL
Use this helmet correctly fastened on your head. When not in use, take it and always
keep it in its bag. Do not leave it directly on the ground or hang it anywhere (nail
on the wall, rear-view mirror...).
Don't leave your helmet in direct sunlight or close to heat sources, such as radiators or
your motorcycle engine. Do not use chemical cleaners or agents.
Avoid hitting the helmet or letting it fall, always keep it in a dry and safe place. Do not
leave your helmet on your bike or hanging from the rear-view mirror, it could fall and
get damaged.

modifications

Never modify your helmet, including making holes or cuts either in the shell, inside or the
screen of the helmet. Don't modify the retention system either. Modifying the helmet could
cause it to not perform its function properly in the event of an accident or impact and
cause severe injury or death.
Always use original 130R spare parts and accessories for screens, mechanisms, visors,
screws or for other parts.
Also, do not repaint or place stickers on your helmet, since the paint or some types of
adhesives can weaken or spoil the materials of your helmet.
screen
This helmet may contain a transparent polycarbonate high impact screen which will
protect you in case of impact or accident. Always keep it clean without affecting vision
through the screen. Although it has an anti-scratch treatment, you must avoid scratches.
In the case of deep scratches that will affect vision, change the screen for a new one as
it will affect your riding, especially at night.
This screen has an anti-fog treatment, but in case of fogging do not ride your motorcycle.
It is very dangerous to ride with the screen misted up.
Clean the screen with water or soapy water with a smooth damp cloth and making
gentle, sideways movements. Concentrate on the dirt if necessary. Dry with a gentle
cloth or absorbent paper. Never use adhesives or chemical substances or cleaners on
the screen.
If your helmet does not have a screen, always use homologated protective goggles for
motorcycle riding.
To change the screen:
1. Raise the screen to the highest position.
2. Press the button all the way.
3. Remove the screen from the mechanism.
4. Drop the button.
To place the screen repeat the process
backwards.
EN
ES
FR
IT
DE
PT
8