Werbung
PIPE INSTALLATION AND ROUTING
1
Cut the pipe to the desired length. The cut
has to be perpendicular to the pipe surface,
between pipe ridges. The cut has to be
clean, without any jagged edges. Remove
any shards that fell into the pipe.
1
3
Place the seal on the
pipe. You can dampen the seal with water
to reduce friction.
3
edg
the pipe
furrow of the
2
Turn the fastening ring into open position,
pull out the end cap and then take the seal
the end cap. Turn the fastening ring
back to the locked position.
2
4
Slide the pipe into the empty distribution
box socket.
ATTENTION:
The connection is air tight
and does not require any additional sealing
materials. Unused sockets must remain
capped.
4
EN
Werbung
