Assembly And Operation - Avalla T-5 Anleitung

Assembly and operation

•
Ensure the unit is unplugged
from the power supply.
•
Slot the handle into the body
and clip into place.
•
Attach a mop pad to the
underside of the steam head.
•
Open the filler port. Using the
filler cup, fill the water tank to
the max line. Close the filler
port.
Mop pad installation.
En
For carpet cleaning, clip on the
carpet glide.
02
03
Power button: Press once to
02
switch on mop and start
producing steam (flashing
display lights). Press again and
mop will turn off from any mode.
Boost button: With power
03
on, press once to enter boost
mode which produces 120ºC
steam (constant display lights).
Press again to return to normal
operation.
Boiler cleaning: Ensure there is at
least 200ml of water in the tank.
Press and hold the power button
for three seconds to enter boiler
cleaning. The lights will flash and
the mop will self clean until all
water is used (approx 5 min for a
full tank of water) or you cancel
the operation by pressing the
power button once.
08