Connect With Ab1000; Recharging - Zendure SuperChraged AB1000 Bedienungsanleitung

EN
Tips:
• It's recommended that both PVHub
and AB1000 are turned off before
connection.
• Make sure to tighten the screw nut after
connecting the battery cable.
• The AB1000 icon will show up on the
LED Light after connection; then you can
start charging or discharging.
• Do not connect the PVHub to the
battery during charging/discharging
process.
• Do not touch the metal pins of the
ports with your hands or other objects.
Gently clean them with a dry cloth when
necessary.
• Tightly connect the Battery Cable with
PVHub and AB1000. A bad connection
can affect the device's performance or
lead to a fire.

5.4 Connect with AB1000

An AB1000 can be stacked on and connected to another unit. The AB1000
batteries stacked onto one another do not require a Battery Cable for
connection.
Tips:
• It's recommended that all AB1000 units are turned off before connection.
• Do not connect them during charging/discharging process.
• Do not touch the metal pins of the ports with your hands or other
objects. Gently clean them with a dry cloth when necessary.
• Battery Mounting Bracket is optional for fixing all the AB1000 units
securely.

5.5 Recharging

The AB1000 can be charged via PVHub from the solar panel.
4