Sicherheitshinweise 1. Der Aufbau und die Bedienung des Levi muss gemäß der Montage- und Bedienungs- anleitung erfolgen, sonst besteht Verletzungsgefahr. 2. Das Tischgestell Levi ist ausschließlich für den Verwendungszweck als ergonomische Verstellmöglichkeit bei Schreibtischen, entsprechend den angegebenen Gewichten und Maßen, in dieser Montageanleitung geeignet. Jede darüber hinaus gehende Verwendung gilt als nicht bestimmungsgemäß.
Safety Information 1. Assembly and operation of the Levi must be in accordance with these assembly instructions otherwise there is a risk of injury! 2. The table support is solely intended to serve the purpose of ergonomic adjustments for your desk in accordance with the weights and measurements given in these instructions.
Seite 5
Keine Vorbohrungen, schraube direkt in die Tischplatte. Positioniere das Gestell zentriert nach deinen Wünschen. No pre-drilling required, screw directly into the tabletop. Position the frame centred as desired.
Seite 14
This ensures that the table top moves parallel to the ground. Before using the Levi desk a Position Reset Procedure must be carried out. You do this as follows: Reset: 1.
Steuergerät Funktionen Tisch bewegen: Tast halten, der Tisch fährt hoch oder runter. 1 2 3 4 Voreinstellung Höhe: Taste halten und in die gewünschte voreingestellte Position fahren. Menü / Memory: Eine Sekunde halten aktiviert Höhe speichern Funktion. 3 Sekunden halten öffnet Menü, dann kurz drücken bestätigt Funktionen im Menü. Zurück: Drücken führt im Menü...
Controller functions Move table: Hold button, the table moves up or down. 1 2 3 4 Preset height: Press and hold the key, the desk will move to the saved position. Menu / Memory: Hold for one second activates the save height function. Hold 3 seconds opens menu, then press briefly confirms functions in menu.
Fehlermeldungen am Display der Steuergerät Am Display wird HOT angezeigt Ursache Behebung Die Steuerung ist mit einem berhitzungsschutz Den Tisch von der Stromversorgung trennen ausgestattet. Durch Überhitzung wurde das und warten, bis die Steuerung abgekühlt ist. Steuergerät abgeschaltet. Die Abkühlzeit beträgt 18 Minuten. Auf dem Display erscheint E + ein Fehlercode Nummer / Beschreibung Behebung...
Seite 19
Error messages on the control display The display reads HOT Cause Remedy The control unit is fitted with overheating Disconnect the table from the power supply protection. Overheating has caused it to stop and wait until the controller has cooled the control unit.
Additional Information 1. The Levi adjustable base is designed to carry up to 130 kg in weight. The weight of the top used needs to be included in this. 2. Intelligent System Protection (ISP) is an electronic state-of-the-art protection system. It also substantially reduces the risk of fingers being trapped or pinched.