Xblitz Master EVO Bedienungsanleitung Seite 7

automatically turn on. The speaker will confirm the activation of BT mode
with a sound notification and message on the display. Before first use, pair
the speaker with the selected device by activating BT connection on the
latter and select XBLITZ MASTER EVO from the list. Successful connection
will be confirmed by a sound notification from the speaker.
To switch to the next ytrack, briefly press the + button. To switch to the
previous song, briefly press the - button. To increase or decrease the volume,
hold down the + button or the - button respectively. Briefly press the M
button to switch the unit to FM mode.
During a phone call, the speaker will read out the caller's phone number,
then start beeping the incoming call. Briefly press the POWER button to
answer the call or hold the same button to reject the call.
2. FM mode
To enter FM mode, briefly press the M button. For automatic programming
of radio stations, press the POWER button. The unit will scan the frequen-
cies in the broadcast band 87.5 - 108 MHz and will store radio stations in
scanning order. These will be stored in the speaker's memory. To switch
between the preset radio stations, briefly press the + or - button. Increasing
and decreasing the volume is analogous to BT mode:by holding down the
+ or - buttons.
Note: To improve the quality of radio signal, it is recommended to plug the
supplied USB cable into the micro-USB port on the device.
3. AUX mode
Connect the speaker to another device using the AUX line.The device will
automatically switch to AUX mode. To switch the speaker to another mode,
use the MODE button or remove the AUX cable (the speaker will then return
to the default BT mode).
4. Playback from external storage media
The device plays .mp3 files from external storage media - USB flash drives
and micro-SD cards. To switch to .mp3 playback simply insert the selected
storage media into the corresponding slot on the speaker. To switch between
tracks, briefly press the + or - buttons. A short press on the POWER button
stops playback from the mass storage.
Note: to avoid the possibility of damaging the mass storage, it is recommen-
ded to plug and unplug it when the device is switched off.
5. LED Backlighting
The device has several LED backlight modes. To switch between the modes,
7