VIND Collection 44000-170 Montageanleitungen Seite 4

@vindcollections
Congratulations on your new furniture from VIND Collection!
We hope you will be happy with your new furniture,
In order to get the most of this products there are some tips on how to care for the different
materials in the best way.
Furniture With MDF-top (painted, laminated, veneer or paper covered)
Be careful with sharp objects as they may scratch the surface and edges. Clean the surface with
damp cloth . Excessive fluids may cause bubbles in the surface.
Some of our furniture are hand painted, hence differences in coloration / small scratches over the
surface is not a claim.
Fabrics / PU / Velvet
Wipe with damp cloth on spots. Especially Velvet and PU-fabrics are sensitive for sharp objects.
Metal
Handle with care in order to not cause distress to the surface. Clean with dust cloth.
Carpets
On the backside of your carpet you can find specific instruction for your rug.
Untreated Wood
Use damp cloth to remove stains. For protection of the surface a clear teak wax can be used. Note
that this will give the table a shiny finish. Clean up any spill immediately.
Marble:
is sensitive to acidic liquids, which makes most standard cleaning detergents not applicable to
marble. In order to protect your marble surface – use soft soap or protective varnish especially
made for marble. These varnishes can usually be found at your local hardware store or furniture
shop.
For more care advise, see www.vindcollection.se
Note!
Be careful when assembling, if screws are tightened too hard (or by screwdriver), damages in the
tabletop may appear. If these damages appear in assembly, we do not concider this a claim!
Tighten all screws 20% before cross-tighten all screws until all srews are fully tightened.
Screws might need to be tightened after some time of using the product.
www.vindcollection.se