Set Up Software; Network Configuration; Get Started - Axis S1016 Installationsanleitung

Page 8 AXIS S1016/AXIS S9001 Installation Guide

Set Up Software

When the computer has been powered on, the Windows operating system will be installed. Follow
the instructions displayed on the screen and provide the required information. When the Windows
installation is finalized, AXIS Camera Station Installer will start automatically. Follow the steps in
the installation wizard and use the default settings.

Network Configuration

AXIS Camera Station can record and play back video from cameras and video encoders that are
connected to a LAN (Local Area Network) or to a WAN (Wide Area Network). Depending on the
installation, follow the instructions under Network & Security Configuration in AXIS Camera Station
User Manual available at www.axis.com

Get Started

AXIS Camera Station Client and the wizard "Get Started with AXIS Camera Station" start
automatically when the installation is complete. "Get Started with AXIS Camera Station" provides
a quick way to add cameras and to configure and enable recording:
1. Select cameras and video encoders to add.
2. Select recording methods and where to store recordings.
3. Review settings and click Finish to add cameras and start recording.
For more information, see the built-in help and AXIS Camera Station User Manual available at
www.axis.com