humanscale M/Power Benutzerhandbuch Seite 6

Reattach Clamps
1
Secure the lower bracket to the larger
bracket reusing the two M6 screws (fig. E)
NOTE: Minimum hole diameter is 3" (76 mm)
Installing M/Power onto Slide Desk
Place M/Power Clamp onto table edge
1
Slide unit with loosely mounted bracket against work surface
edge.
Tighten Clamp
1
Tighten both set screws into bracket to a snug fit (fig. F)
6
F
①
E
②
③