Inhaltsverzeichnis
Werbung
11. The doors must open completely and without hindrance.
12. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
13. Do not cover or block the cover panel of the compressor at the back of the
appliance.
14. Connect the appliance to the mains properly.
15. The nameplate is located inside the appliance or at the back.
WARNING!
1. An electrical supply of 220-240V AC / 50 Hz is required.
2. Connect the appliance to a suitable and dedicated socket only.
3. For your personal safety, the appliance must be grounded. The appliance is
equipped with a 3-pole grounding plug. Use a suitable socket to minimize the
risk of an electric shock.
4. Check if the technical data of your energy supply meet the values on the
nameplate.
5. The plug must always be easily accessible after installation.
Clockwise → down
Electrical connection
Do not connect the appliance to the mains
unless you have removed the complete packaging.
Adjustable feet
Anti-clockwise → up
33
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
