Led-Status - Yealink VCM36-W Schnellstartanleitung

E
N
G
• Battery LED indicator:
L
I
S
LED Status
H
Solid red
Solid green
Slowly flashing red
Fast flashing red 3
times and then off
Solid green for 3
seconds and then off
Solid green for one
second and then off
Off
Note: When the VCM36-W is not used for a while, it will enter standby
mode. You can wake up the VCM36-W by tapping the Mute button or
placing it in the charging cradle. After wake-up, the VCM36-W will
return to the state before standby.
Upgrading the VCM36-W
If the video conferencing system or UVC camera has a built-in wireless
microphone firmware after pairing with VCM36-W successfully, the VCM36-W
will be upgraded automatically.
Note: Make sure
4
Charging.
Fully charged.
The battery capacity is less than 20%.
The battery capacity is too low to power
on the VCM36-W.
The VCM36-W is standby.
The VCM36-W is powered on.
• The VCM36-W is in standby mode.
• The VCM36-W is powered off.
the VCM36-W has enough power before upgrading.
Description