Temperature Dial - Ooni Volt 12 Handbuch Und Sicherheitshinweise

7. Temperature dial

a. Turn the dial clockwise to increase the Ooni Volt 12 oven temperature.
b. Turn anticlockwise to reduce the Ooni Volt 12 oven temperature.
c. Temperature set to 450°C (Max temp)
d. Current temperature = 300°C during heat up
e. Set temperature achieved at 450°C
We recommend using the Ooni Infrared Thermometer to ensure the Baking
Stone is up to temperature for best results.
8. Balance Dial Setting
The right-hand dial is the balance dial. This dial shifts power between the top
and the bottom heating elements. You can use it to change the way that your
base or pizza toppings cook.
a. Balance settings on the Ooni Volt 12 are pre-set for each temperature. As
you select your temperature the balance will automatically be set.
b. During the heat-up sequence the balance indicator will turn off.
c. Once your Ooni Volt 12 has reached the selected temperature the balance
"indicator" will turn back on and can be adjusted.
d. Turn the dial clockwise to shift the balance towards the top.
e. Turn the dial anticlockwise to shift the balance towards the bottom.
Check out the Ooni Volt 12 Essentials Guide to view our recommended oven
settings for different pizza styles.
9. Boost
If the base of your pizza is not cooking in line with the top, Boost can be used
to recharge the stone.
a. Turn the balance dial anticlockwise all the way around.
b. Boost function has started when the icon starts to flash quickly. Boost will
last for 45 seconds.
c. Once Boost has stopped, your balance will return to the temperature
recommended setting. The bottom icon will flash slowly, Boost is not
available during this time.
d. When the icon stops flashing Boost mode is available again.
10. Mute
To mute or unmute the dial chime, press the timer dial in for three seconds.
This will not mute the timer or the "temperature reached" sounds.
6