Checking The Battery Level; Led Light - fontastic Atria20 Bedienungsanleitung

The charging process is terminated. Disconnect the
power bank from the charger.
Note: Fully charge the power bank before using it
for the first time. The usual charging time is approxi-
mately 4 hours, but may vary depending on the USB
charger used.

Checking the battery level

To check the battery level, press the power button (3).
The LED diodes will light up for a few seconds, indica-
ting the battery level of the powerbank.
Four LEDs mean your powerbank is fully charged, one
LED means it is almost empty.
Charging devices with the powerbank
To charge devices via the powerbank, connect the
device you want to charge to a USB cable, and connect
the cable to one of the USB-A ports (5) or the USB
Type-C port (7) of the powerbank. The charging process
will begin. Disconnect the cable from the powerbank
after use.
Note: If you use multiple USB ports at the same
time, the available power will be divided. Refer to
your device's user manual to see what the required
current draw is.
Note: If a short circuit occurs while charging a
device, the powerbank will shut down. Plug the
micro USB cable into the micro USB input (6) of the
powerbank, and connect the USB plug of the cable
to a USB charger or a computer. A short charging
pulse is enough to reactivate the powerbank.

LED light:

The integrated LED light is operated by the power
button (2).
GB
6