urmet 1071 Bedienungsanleitung Seite 8

EnGLiSH
The light control kit can operate up to 12 lights, typically located in three rooms (A, B, C). The kit can
implement no fewer than 11 different light scenarios in addition to turning the individual lights on and off.
uSE
In Room A, three or four buttons (P1..P4) grouped on the same plate operate the individual lights (or groups
of lights) in Room A in toggle mode when pressed briefly. If pressed for longer than one second, instead,
they operate the lights as follows:
— P1 all lights in Room A on
— P2 all lights in Room A off
— P3 all lights in Rooms A and B off
— P4 all lights off in all three rooms.
In Room B, three or four buttons (P5..P8) grouped on the same plate operate the individual lights (or groups
of lights) in Room B in toggle mode when pressed briefly. If pressed for longer than one second, instead,
they operate the lights as follows:
— P5 all lights in Room B on
— P6 all lights in Room B off
— P7 all lights in Rooms B and C off
— P8 all lights off in all three rooms.
In Room C, three or four buttons (P9..P12) not necessarily grouped on the same plate operate the individual
lights (or groups of lights) in Room C in toggle mode when pressed briefly. If pressed for longer than one
second, instead, they operate the lights as follows:
— P9 all lights in Room C on
— P10 all lights in Room C off
— P11 nothing
— P12 all lights off in all three rooms.
Operation is illustrated in the following figures.
Room A
8
DS1071-09