HOMCOM 830-472 Montageanleitung Seite 9

Operation instructions
Part 1: Power on/off
Power on: Hold the 'PROG' button for
one second until the red light comes on.
The motor will jog once.
Power off: Hold 'PROG' for seven
seconds (motor will jog for one second),
the red light will flash three times, then it
will turn off.
Part 2: Pairing the remote control
A. Hold 'PROG' on the motor head for one second, the motor will jog once.
B. Press 'UP' on the remote control, the motor will jog once. Your remote control is now
paired.
Check the directions work properly, confirming that 'DOWN' brings the shades down
and 'UP' brings them up.
Part 3: Change direction (If necessary)
Hold 'STOP' on the remote control for approximately five seconds until the motor jogs,
then release. Press 'DOWN' – the motor will jog once. The direction will be reversed.
-9-
POWER button
"PROGRAM" button