DreamLED Color Sensor Touch LED lamp Benutzerhandbuch

PACKAGE CONTENTS
The DreamLED Color Sensor Touch LED lamp packaging includes:
* Color Sensor Touch LED lamp
* Power cable + Power adapter
* Manual
FEATURES
• Type of LED: 3528 HP LED • Color rendering index: >80RA
• Desk lamp: 34x HP SMD LED • Power supply: DC 5V/1A
• Color touch lamp: 2x HP RGB LED • Instant start
• Auto color changing mode • Operating temperature: -10 ~ 40 °C
• Max. wattage: 5W • Material: ABS + PS +Rubber
• Color temperature: 3700~4000K • Dimensions: 480 mm (H)
• Lifetime: >25000 hours • Color: Opal white
• Lumen: max. 200 Lm • Weight: 775 grams
INSTALLATION
See illustration 1
• Connect the power adapter to the power input at the back of the lamp.
• Plug the power adapter into an outlet with an input voltage of 110V-240V AC.
OPERATION
See illustration 2
A. ON/OFF touch key + 3-level brightness sensor touch dimmer (for desk lamp)
B. Sensor touch wheel for changing color of the living color lamp
C. ON/OFF sensor touch key (for living color lamp)
Operation desk lamp
See illustration 3
Press the touch key (A):
• 1x to turn the lamp ON. First level of brightness is shown.
• 2x to activate the 2 nd brightness level.
•
3x to activate the 3 rd brightness level.
•
4x to turn the lamp OFF.
Operation living color lamp
See illustration 3
• Press the sensor touch key (C) to turn the lamp ON/OFF.
• Select a color using the sensor touch wheel (B).
• Press the sensor touch key (C) for 3 seconds to show all colors one by one
automatically.
Flexible lamp arm
See illustration 4
The flexible goose neck lamp arm can be rotated in different angles.
Note:
• When adjusting the position of the arm, always hold the lamp base.
• Excessive adjustment may cause damage.
SAFETY INSTRUCTIONS
• Never open the Color Sensor Touch LED Lamp.
•
Never touch the plug contacts with sharp or metal objects.
•
Make sure that cables cannot cause a trip hazard.
•
Use only the original power supply and original accessories.
•
Never place the device in the vicinity of heat sources.
• Never place the unit on surfaces that are heat sensitive.
• Protect the device from special liquids and vapors.
• Unplug the unit at the main power socket before cleaning. Do not use any solvent
based cleaning agents, only a soft, dry anti-static cloth.
• Do not attempt repairs yourself.
•
If the unit is not properly installed or operated DreamLED® cannot accept liability.
SUPPORT
For more information, technical questions and return requests concerning this product,
you should contact: support@dream-led.eu.
GUARANTEE
Copyright © DreamLED ® . DreamLED ® is a registered trademark of TE-Group NV. The
DreamLED ® brand stands for superior product quality and outstanding customer
service. That is why DreamLED warrants this product against all defects in material
®
and workmanship for a period of two (2) years from the date of original purchase of the
product. The terms of this guarantee and the extent of responsibility of DreamLED
this warranty can be downloaded from the website: www.dream-led.eu.
GB ILLUSTRATIONS
Illustration 1
Illustration 3
Illustration 4
DECLARATION OF CONFORMITY
,
Hereby
DreamLED Color Sensor Touch LED lamp
RGB Color Sensor Touch LED lamp
The above mentioned product complies with the essential requirements, which
are specified in the directive 2004/108/EC on the approximation of the laws on the
Member States relating to electromagnetic compatibility.
This product has been tested against following standards and specifications,
applying versions valid on August 2014:
EN55015:2006+A1:2007+A2:2009
EN61547:2009
EN61000-3-2:2006+A1:2009+A2:2009
EN61000-3-3:2008
® under
Joseph Van Oosterum, CEO TE-Group NV
------------ Manual/DreamLED Color Sensor Touch LED Lamp/08-14/V01 -------------
Copyright © DreamLED
Illustration 2
A
B
C
Color Sensor Touch LED lamp
®
User's Manual
NL FR D
GB