Maintenance & Storage; English - JCMaster BEAUTY JDK6 Anweisungen

Important Safety Instruction
When using the product, all instructions and basic precautions should
always be followed, including the following:
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Please use the correct power source (110V/220V).
2. Before using the device, make sure that the bit is well secured in the handpiece.
3. Please adjust the rotating speed gently and slowly.
4. Do not touch any rotating parts while using the device.
5. Turn off the device before switching to another rotational direction.
6. Do not cover the ventilation unit.
7. Replace the cable immediately if it's broken.
8. Clean and disinfect the device after each use to avoid health issues.
9. Avoid storing or placing the device to a moister place.
10. Do not use the device that has fallen into the water and unplug it
immediately.
11. Do not use the device if the cable or plug is damaged.
12. Avoid excessive bending or pulling the cable. Keep the cable away from the hot
surface.
13. The device should never be left unattended when plugged in.
Unplug from outlet when it is not used and before putting on or taking off parts.
14. Do not drop or insert any object into any opening.
15. To disconnect, switch off all controls and remove the plug from the outlet.
16. Keep the device away from children and inexperienced persons.
Maintenance & Storage
1. If the nail dust keeps getting into the controller or handpiece and is not being
cleaned, after a period, the device will become defective easily.
Therefore, it is very important to use a vacuum fan (or cover the device by a
cloth) during the use and clean it after each use.
2. Keep the device clean and store it in a dry and no dust place.

English

01