After Use; Cleaning And Care; Cleaning; Lubricating The Trimmer Blade - kooa GEAR MINI Bedienungsanleitung

After use

‚ We recommend that you use the battery until it is fully
discharged to maintain its charging capacity.
‚ To charge the trimmer, put it back in the charging tray
and plug the charging tray into the power outlet.

Cleaning and care

Electric shock HAZARD
− Do not dip the device, charging tray and
mains adaptor in water and do not rinse
them under running water.
NOTE on material damage
− Do not use aggressive chemical cleaning
agents, abrasives, hard sponges or the
like for cleaning. Doing so could damage
the housing surface.
Clean and lubricate the device regularly to ensure its proper
functioning. Always switch off the device before any cleaning
and maintenance work.

Cleaning

− Use the supplied cleaning brush to remove hair from
the trimmer blade and comb attachment.
− Use a slightly damp soft cloth to wipe the trimmer
when necessary.

Lubricating the trimmer blade

1. Remove the comb attachment.
2. Remove hair using the
cleaning brush.
3. Apply a drop of oil to each of
the spots shown.
4. Then switch on the device
briefly for the oil to spread
evenly, forming an oil film.
25